Description

Upgrade your snowmobile’s performance with the SP1 Ripper Four75 Carbides, designed to provide enhanced durability and precise handling. Featuring a 7/16 inch carbon steel host bar with a flat top, these carbides prevent “bar roll” during aggressive cornering, ensuring stability and control in challenging conditions. The carbides are crafted from high-quality yg13 tungsten, offering exceptional tensile strength and hardness to reduce chipping and extend service life. The 90-degree angle of the carbide into the runner pocket creates large cross sections, optimizing edge contact and improving turning responsiveness. Each 1-inch carbide segment allows for flex in the ski without compromising adhesion, delivering a smooth and reliable glide on snow. Engineered and test-fitted for a precise fit, these carbides are easy to install and feature chamfered ends that reduce catching when backing up or unloading. Extended studs accommodate ski skins, enhancing versatility for different snow conditions. All necessary fastening nyloc nuts are included, and the carbides and wearbars are finished with black rust preventative coating for added longevity. With 4 inches of 75-degree tungsten carbide, these carbides are less aggressive than traditional options, providing a longer wear period while maintaining effective performance. Hardwelded in the front and back for extended durability, the SP1 Ripper Four75 Carbides are recommended for use with lightly studded tracks or without studs, making them suitable for a variety of snowmobiling adventures. Whether you’re tackling tight turns or cruising open trails, these carbides will help you maintain optimal control and extend the life of your ski runners.

Features:

• 7/16 inch carbon steel host bar with flat top to prevent bar roll during aggressive cornering

• Carbides made of yg13 tungsten for ultimate tensile strength and increased longevity

• 90-degree carbide angle into the pocket creates large cross sections for improved edge contact

• 1-inch carbide segments allow flex without compromising adhesion

• Engineered and test-fitted for easy installation

• Chamfered ends to reduce catching when backing up and unloading

• Extended studs to allow for ski skins

• Includes all necessary fastening nyloc nuts

• Carbides and wearbars finished in black rust preventative coating

• s 4 inches of 75-degree tungsten carbide for longer wear

• Hardwelded in the front and back for extended durability

• Recommended for use with lightly studded tracks or no studs

Fitment:
Polaris 340 Touring 136″2007
Polaris 550 SuperSport 121″2007
Polaris 550 SuperSport 121″2008
Ski-Doo Expedition Sport 550 154″2005
Ski-Doo Expedition Sport 550 154″2006
Ski-Doo Expedition Sport 550 154″2007
Ski-Doo Expedition Sport 550 154″2008
Ski-Doo Expedition Sport V-8002007
Ski-Doo Expedition Sport V-8002008
Ski-Doo Freestyle 3002006
Ski-Doo Freestyle Back Country2007
Ski-Doo Freestyle Back Country2008
Ski-Doo Freestyle Back Country2009
Ski-Doo Freestyle Session 3002007
Ski-Doo Freestyle Session 3002008
Ski-Doo Freestyle Session 5502007
Ski-Doo Grand Touring 380 Fan2003
Ski-Doo Grand Touring 550F2003
Ski-Doo GSX 380 Fan2005
Ski-Doo GSX 550F2005
Ski-Doo GTX 380 Fan2005
Ski-Doo GTX 550F2005
Ski-Doo Legend 380 Fan2002
Ski-Doo Legend 380 Fan2003
Ski-Doo Legend 380 Fan2004
Ski-Doo Legend 550F2004
Ski-Doo Legend Touring V-8002007
Ski-Doo Legend Trail V-8002007
Ski-Doo MX Z 380 Fan2003
Ski-Doo MX Z 380 Fan2004
Ski-Doo MX Z 380 Fan2005
Ski-Doo MX Z 550F2003
Ski-Doo MX Z 550F2004
Ski-Doo MX Z 550F2005
Ski-Doo Skandic Sport 5002003
Ski-Doo Skandic Tundra 3002006
Ski-Doo Skandic Tundra 3002008
Ski-Doo Skandic Tundra 3002009
Ski-Doo Skandic Tundra 5502010
Ski-Doo Skandic Tundra 5502011
Ski-Doo Skandic Tundra V-8002007